Orbit Controls Transmitters
Transmitters are designed for industrial applications for transforming of the proces signal into a standardized isolated analog output 0-10V or 0/4-20mA. Appart of the proces signals a large number of sensors can be connected such as Pt-100, Thermocouples, potentiometric sensors inductive, capacitive or optical pick-offs, resistors etc. The transmitters are supplied from 230VAC or 24VDC and enclosed in a DIN cabinet for 35mm rails.

OC35-AC Transmitter for AC Signals OC35-AC are transmitters for measurement of true r.m.s. voltage, current or power. They convert the input signals into standardized 4-20mA or 0-10V analog output and are supplied from the mains or DC sources. The signal input is DC coupled and permits measurements from DC to 1kHz. The output signal is isolated by 250V from the input and the supply. Larger currents can be connected via current transformers or shunts.   View or download the Data Sheet as Adobe Acrobat  All available datasheets and manuals can be found here   Input  Voltage 60mV to 250V AC true RMS, Current 1 mA to 5A AC true RMS, Power 250V and 5A AC RMS Outputs  4-20mA or 0-10V isolated Accuracy  up to ± 0.05% of F.S. Supply  230VAC or 24VDC

Price: from EUR 147 .-
 

OC35-COND-AC Conductivity Transmitter OC35-COND-AC is a programmable Transmitter for measurement of conductivity of liquids with a two terminal sensor. The excitation with a sine wave signal permits a measuring range of 0-1000kOhm. The results are shown at a four digit display. Two Analogue Outputs 0-10V and 4-20mA, one Set Point Relay and the serial Data Port are derived from the display readings   View or download the Data Sheet as Adobe Acrobat  All available datasheets and manuals can be found here   Input  0-1000 kOhm Outputs  0-10V, 4-20mA, RS232 Set Points  Set Point Relay Digital Display  4 Digit Display

Price: EUR 296 .-
 

OC35-COND-DC Conductivity Transmitter OC35-COND-DC is a programmable Transmitter for measurement of conductivity of liquids with a two terminal sensor. The excitation with a DC signal permits a measuring range of 0-1000kOhm. The results are shown at a four digit display. Two Analogue Outputs 0-10V and 4-20mA, one Set Point Relay and the serial Data Port are derived from the display readings.   View or download the Data Sheet as Adobe Acrobat  All available datasheets and manuals can be found here   Input  0-1000 kOhm, two terminals connection Outputs  0-10V, 4-20mA and RS232 Set Points  Set Point Relay Digital Display  4 Digit Display Supply  24VDC

Price: EUR 296 .-
 

OC35-Cu Transmitter for Copper Sensors OC35-Cu is a transmitter for connection to copper temperature sensors. It converts the temperature depending sensor resistance into a linearized analogue output 4-20mA or 0-10V.The output signal is optically isolated from the input and the supply.The linearizing method utilises an analogue Linearizer with accuracy of 0.1% of the full range.The sensors can be connected with 2, 3 or 4 terminals. The entire range covers -20 ... 100 C. Sub-ranges can be ordered.The Transmitter is supplied from 230V AC or 24V DC.   View or download the Data Sheet as Adobe Acrobat  All available datasheets and manuals can be found here   Input  Cu Sensor with 46.33 Ohm @ 0 C Ranges  - 20 ... + 100 C. Analog Output  0 ... 10V or 4-20mA, isolated Supply  230VAC or 24VDC Cabinet  For 35mm DIN rails

Price: from EUR 193 .-
 

OC35-DC Transmitter for DC Signals OC35-DC are transmitters for DC- signals. The input signal is converted into standardized isolated output 4-20mA or 0-10V. The input range can be selected from 20mV to 250VDC or 0/4-20mA to 5ADC. The transmitters are supplied from 230VAC or 24VDC and intended for rail mount.   View or download the Data Sheet as Adobe Acrobat View or download the Manual as Adobe Acrobat  All available datasheets and manuals can be found here   Inputs  0 ... 60mV to 0 ... 250V DC, 4-20mA, 0 ... 1 mA to 0 ... 5A DC, 2 x 4 - 20 mA, Input  Potentiometers: 0 ... 100 Ohm to 0 ... 100kOhm Outputs  Analog Outputs 10V or 0/4-20mA isolated or non-isolated. Supply  230V AC or 24V DC Frequency  Frequency Range DC-10kHz without LPF (Option), or DC-0.1Hz with active LPF (Standard)

Price: from EUR 136 .-
 

OC35-F Frequency Transmitter Model OC35-F is a transmitter for converting of un- known frequencies into analog output signals 4-20mA or 0-10V. The required frequency range is determined with jumpers inside the instrument and can be set for nearly any industrial sensor or flowmeter with output frequencies up to 10 kHz. One Set Point with relay output is optionally available. The adjustment is with a potentiometer at the front.   View or download the Data Sheet as Adobe Acrobat View or download the Manual as Adobe Acrobat  All available datasheets and manuals can be found here   Input  0 - 10 kHz in five selectable ranges Analog Output  0-10V, 4-20mA isolated or non-isolated Supply  230V AC or 24V DC

Price: from EUR 136 .-
 

OC35-FD Flow Transmitter OC35-FD is a Transmitter for converting of unknown frequencies into analog output signals 4 - 20mA or 0-10V. The required frequency range can be set for nearly any industrial sensor or flowmeter with output frequencies up to 10 kHz. The Transmitter offers a five digit programmable divider with output transistor or mechanical relay. Depending on the settings of the divider, the output pulses are generated after each liter, gallon, kg, pound etc. of the flown medium. The transmitter delivers both information at the same time: the momentary flow rate and the cummulated flow units.   View or download the Data Sheet as Adobe Acrobat View or download the Manual as Adobe Acrobat  All available datasheets and manuals can be found here   Input  0 - 10 kHz in five selectable ranges Analog Output  4-20mA, 0-10V Outputs  Relay or Transistor Supply  230V AC or 24V DC

Price: from EUR 270 .-
 

OC35-IMP Transmitter for magnetic Pick-Ups OC35-IMP is a transmitter for direct connection to pasive magnetic pick-ups with mV output signals. The level of the output signal can be selected for 5V TTL or free adjustable from 0 to 10V with an internal potentiometer.The sensitivity is adjustable with the front panel potentiometer. An active filter with 1kHz and 10kHz cut-off frequency can be activated upon demand. OC35-IMP is supplied from 24VDC and is designed for 35mm rail mount   View or download the Data Sheet as Adobe Acrobat  All available datasheets and manuals can be found here   Input  pasive magnetic Pick-Ups with mV-signals. Frequency range 0-10kHz Outputs  5V TTL and adjustable 0-10V square wave Supply  24VDC-1W Cabinet  for DIN 35mm rails

Price: EUR 168 .-
 

OC35P-DAY Potentiometric Transmitter OC35P-DAY is an analog transmitter for potentiometric sensors. It converts the mechanical linear or rotational movement into a proportional analog output signal. Two outputs are available, 0 - 10V and 0/4 - 20mA. The current output can be set for 0 or 4mA. OC35P-DAY has very high accuracy, stability and very atractive price. Potentiometric sensors between 1kOhm and 100kOhm can be connected. For rotative sensors the output signal can be calibrated in degrees e.g. 0 ... 345 ° correspond to 4 - 20mA.   View or download the Data Sheet as Adobe Acrobat View or download the Manual as Adobe Acrobat  All available datasheets and manuals can be found here   Input  1kOhm to 100kOhm Potentiometers Analog Output  4-20mA and 0-10V simultaneously, responce time 5ms, isolated from supply Supply  18-36VDC/2W

Price: EUR 130 .-
 

OC35-pH Transmitter for pH Probes OC35-pH is an analogue Transmitter for industrial applications. It is designed for two terminal connection to pH Probes for pH measurements 0 -14pH. The mV signals from the pH probe are filtered in a LPF with 10 seconds time constant and converted into two independent process signals 0-10V and 4-20mA. The output signals are isolated from the pH probe and from the supply.   View or download the Data Sheet as Adobe Acrobat  All available datasheets and manuals can be found here   Input  413 ... -413mV, 0-14pH. Other ranges also available Outputs  0-10V and 4-20mA isolated Accuracy  +/- 0.2% from Full Scale Supply  18-36VDC, 2W

Price: on request